PVC Glue 747 Weld-On Pool 'R Spa

PVC Weld-On glue is for use on rigid and flexible PVC pipe and fittings all classes and schedules. Specially formulated for applications where conditions are very wet and/or quick pressurization is desired. Developed specifically for pool, spa and whirlpool applications.  Applies as a Blue colour and fades to clear in the sun.  

How To Use PVC Glue. Apply the glue on the inside of the ball valve then apply the glue to outside of the hose and again apply more glue on the inside of the valve.  Insert the pipe into the valve and give it a 1/4 turn.  Hold it in place for 30 seconds and wipe off excess glue.  Let sit for 15 minutes before proceeding

How Long should PVC glue dry before turning on water?  After joining the valve to the flex pipe you must hold them together for 30 seconds until the plastic hardens or they can slip apart. It takes another 15 minutes for it to harden to a point at which it can withstand water pressure and two hours to fully cure.